330103-00-06-10-02-00延長電纜330130-070-00-CN
330103-00-06-10-02-00延長電纜330130-070-00-CN
產品詳情資料：
3500/40M?位移監測器?
3500/40M?Proximitor.是4通道位移監測器，接收本特利位移傳感器的輸入，對信號進行處理後生成振動和位移測量量，並將處理後的信號與用戶可編程的報警設置點進行比較。可以使用3500?框架組態軟件對3500/40M?的每個通道進行組態，使其具有如下功能：??????
徑向振動?????
軸向位移?????
差脹?????
軸偏心??
???REBAM○
R滾動軸承振動??注:??該監測器通道成對組態，一次多可執行上述功能中的2?個。通道1?和通道2?執行一個功能，通道3?和通道4?執行另一個功能或同一功能。
3500/40M?監測器的主要功能為:???
1)??通過連續不斷地將機器振動當前值與組態中的報警值進行比較，並驅動報警係統，從而達到保護機器的目的；??
2)??為操作人員和維護人員提供關鍵設備的振動信息。??
?通過組態，每一通道通常將輸入信號處理成“靜態值”。每一靜態值都有組態好的警告報警值，每兩個靜態值都可組態一個危險報警值。報警的延遲時間可通過軟件設定。
前面板LED（發光二極管）OK?LED:?指示3500/40M?正常運行??
TX/RX?LED:?指示3500/40M?正與3500?框架內其它模塊通訊??Bypass?LED:?指示3500/40M?處於旁路模式??
傳感器緩衝輸出:?前面板對應每一通道均有同軸接頭，每一同軸接頭都有短路保護
1.??狀態發光二極管
2.??緩衝傳感器輸出??
3.??I/O?模塊??
4.??柵?I/O?模塊，?內部端子??
5.??I/O?模塊，內部端子??
6.??I/O?模塊，外部端子?
7.??I/O?模塊，外部端子
產品英文詳情資料：
3500/40M displacement monitor
The 3500/40M Proximitor is a 4-channel displacement monitor that receives input from Bentley displacement sensors, processes the signal to generate vibration and displacement measurements, and compares the processed signal with user programmable alarm setpoints. You can use the 3500 Rack Configuration Software to configure each channel of the 3500/40M to have the following functions: ?
Radial vibration ?
Axial displacement ?
Differential expansion ?
Shaft eccentricity
???REBAM○
R rolling bearing vibration note: This monitor channel is configured in pairs and can perform more than 2 of the above functions at once. Channel 1 and channel 2 perform one function, while channel 3 and channel 4 perform another function or the same function.
The main functions of the 3500/40M monitor are:
1) By continuously comparing the current value of machine vibration with the alarm value in the configuration, and driving the alarm system, the purpose of protecting the machine is achieved; ??
2) Provide vibration information of critical equipment for operators and maintenance personnel. ??
Through configuration, each channel typically processes the input signal as a "static value". Each static value has a configured warning alarm value, and each two static values can be configured with a danger alarm value. The delay time of the alarm can be set through software.
Front panel LED (light emitting diode) OK LED: indicates normal operation of 3500/40M
TX/RX LED: indicates that the 3500/40M is communicating with other modules in the 3500 rack. Bypass LED: indicates that the 3500/40M is in bypass mode
Sensor buffered output: The front panel corresponds to each channel with coaxial connectors, and each coaxial connector has short-circuit protection
1. Status LED
2. Buffered sensor output
3. I/O module
4. Barrier I/O module, internal terminals
5. I/O module, internal terminals
6. I/O module, external terminals
7. I/O module, external terminals
免責聲明：
AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的，並不表示與任何權利持有人有任何關聯或授權。